UHV-8003 Portable Ultrasonic Partial Discharge detector is mainly used for Receive the ultrasonic signal generated by partial discharge to judge the existence and location where the partial discharge occur from transformer, GIS, motor, cable and insulator and overhead cable etc. It is mainly composed by: Portable Ultrasonic Partial Discharge Detector- main host,Contact ultrasonic Sensor, High Frequency Transformer, UHF Sensor, Wave Concentrator etc.

It comply with the standard: IEC 61000-4-2:1995,IEC 61000-4-5:1995,IEC 61000-4-3:1995, GB 4793.1-2007, IEC 61000-4-4:1995

and the equipment have following features:

1.4.0 inch RGB LCD touch screen, resolution 800*480

2.Simultaneous interpreting PD signals of almost all electrical equipment with different sensors including: External contact ultrasonic sensor, External non-contact concentrator, (UHF sensor) Ultra high frequency sensor, ( HTFC sensor ) High frequency transformer

3.The testing bandwidth range is 30kHz~2.0GHz, suitable for various frequency band detection principles;

4.Humanized man-machine interface facilitates data management of different equipment;

5.Built in ultrasonic sensors and transient ground voltage (TEV) sensors, can be externally connected to specialized sensors such as transformers, GIS, overhead lines, cables, etc;

6.The non-invasive detection method is adopted, so there is no need to cut off power and configure additional high-voltage source in the test process, which is more convenient than the traditional pulse partial discharge detector;

7.Configure different sensors to realize partial discharge detection of almost all electrical equipment;

8.A user-friendly human-machine interface facilitates data management for different devices;

9.Non intrusive detection mode is adopted, so there is no need to cut off power during the test, and no need to configure additional high-voltage source, which is more convenient than the traditional pulse type partial discharge detector;