qiao@hvtest.cc15871365102
  • UHV-344 Transformer Oil Double-stage Vacuum Oil Filter

    Suitable for oil treatment, transformer vacuum oil injection, and hot oil circulation drying during the installation and maintenance of large transformers.

    Product Details of UHV-344 Transformer Oil Double-stage Vacuum Oil Filter

    Product Introduction

    Widely used in the installation and maintenance of various large transformer equipment, wind power generation, thermal power generation, power supply bureaus, etc., for oil purification and vacuum hot oil circulation drying. For the purification of insulating oil in transformers of 35KV-110KV-220KV, vacuum drying can be performed simultaneously with filtration. The dual-stage vacuum oil filter requires a dehydration and degassing system to quickly remove moisture, gases, and harmful components such as light hydrocarbons from the oil. It features a precision filtration system with multi-stage, progressively more refined filtration to effectively remove mechanical impurities from the oil; an electric heating constant temperature automatic control system ensures rapid oil heating and eliminates "dead oil zones." It guarantees uniform oil heating and stable oil temperature; it also has vacuum pumping and vacuum oil injection functions, and can perform ultimate vacuum extraction for transformers and GIS electrical equipment. Therefore, it meets various on-site requirements.


    Working principle and process

    After the treated oil passes through the magnetic filter, it enters the thick filter heater for heating. The heated oil passes through the second-stage filter from the oil suction pump to the spiral spray atomization system. The insulated oil becomes coarse-grained fog and falls on the reaction tower and enters the vacuum separation chamber. The moisture begins to evaporate. The oil mist, a multi-dimensional evaporation structure formed in the tank can achieve the purpose of purification through a short cycle. Oil products that have been removed from impurities, dehydrated, degasified and acid are completed through a precision filter under the action of the oil exhaust pump. The water vapor hot air separated from the vacuum separation chamber enters the inspector. Most of the water vapor condenses into the water tank. Outside the discharge machine, the hot air in the oil is discharged by a vacuum pump after cooling.


    DSC01302


    פרמטרים טכניים

    ItemיחידהSpec
    דֶגֶם
    SY/ZD-RM-150
    Volume of flowL/min150
    L/H8000-10000(Variable frequency adjustable)
    טווח בקרת טמפרטורה℃0~100
    טמפרטורת עבודה℃20~60
    Extreme vacuumנו≤20
    Working vacuum degreeMpa-0.06~-0.099
    Gas content in oil%≤0.1
    Work pressureMpa≤0.5
    Filtration accuracyµm≤1
    Water content in oilppm≤3
    Oil breakdown voltageKV≥65
    Heating powerKW72
    כוח מוחלטKW80
    ספק כוח
    Three-phase five-wire system 380V 50HZ
    Inlet/outlet pipe diameterמ"מ50
    Continuous working hoursח≥800
    Trouble-free working hoursח≥8600


    Oil quality indicators after insulating oil treatment

    Performance projectיחידהPost-processing indicatorsTest method
    1. Moisture content%noneGB/T511
    2. Moisture contentPPM≤3GB/T7600
    3. Pressure resistance valueKV≥65KVGB, DL or IEC standards
    4. Residual gas≤1%≤0.5Gas content measurement methods shall be in accordance with relevant GB, DL or IEC standards.
    5. Acid value1µm


    DSC01381

    DSC01377


    Product features

    1. The combination of high vacuum, high pumping speed, internationally leading annular three-dimensional compound flash evaporation technology and microgram technology can efficiently and quickly remove harmful components such as water, dissolved micro water, free carbon, and gases.

    2. Adopting a combination of multi-layer polymer mesh filtration and strong magnetic electrostatic adsorption for impurity removal technology, the filtration area is large, the pollutant holding capacity is strong, and the filtration accuracy is high, with ß 3 ≥ 1000

    3. The compound three in one protection device can automatically protect high and low oil levels, automatically detect infrared bubbles, automatically control liquid levels, automatically maintain temperature, and automatically protect pressure. It has a high degree of automation and is sensitive and reliable to operate.

    4. Specially suitable for vacuum oil injection, large-scale vacuum pumping, and vacuum drying of transmission and transformation equipment above 110KV during installation or maintenance sites.

    5. Online oil filtration, can be unmanned, and the operating status is displayed by indicator lights.

    6. Humanized design, low noise, simple operation, long maintenance intervals, low energy consumption, and cost savings in operation.

     

    Function of Two-Stage Vacuum Oil Filter

    The whole machine process mechanism and vacuum oil filter should have the functions of high-efficiency dehydration, degassing, filtration and drying transformer oil. The main components are: oil inlet pump, coarse filter, oil exhaust pump, degassing tank, heater, polymer purifier, magnetic filter, vacuum pumping system, constant temperature control and automatic oil temperature control system, electrical control cabinet, etc. The quality of the steel frame and other equipment should be intact and non-destructive, and the connection should not be loose. There are no welding tumors, burrs or rust spots at the welding part. The surface of the product adopts a plastic spraying process, and the surface should be smooth and bright. The machine should have the functions of filtration, purification and regeneration, which can efficiently remove moisture, gas and mechanical impurities in the insulating oil.








    אולי תאהב גם

    • יש איזה שהן שאלות!

      אל תהסס לפנות אלינו בכל עת
      צור קשר
    • בקר אותנו

      בניין 6, Optics Valley פארק תעשייה אופטי-מכני, 84 Gaoxin 5 Road,
      אזור פיתוח טכנולוגיה חדשה של איסט לייק, עיר ווהאן, מחוז הוביי, סין

    • שלח לנו מייל

      qiao@hvtest.cc

    • התקשר אלינו

      +86-15871365102